F3M-S825-1【PDF 2/4 页】SENSOR COMB 8" WAFER 25 SLOTS

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录53

1页 [2页]3页 4页

F3M-S825-1

Specifications

J RATINGS/CHARACTERISTICS

Item

F3M-S825-1

Target object

8-inch semiconductor silicon wafers and transparent wafers

(with transparency of 92% max.) (See Note.)

Number of channels

Optical axis pitch

6.35 mm

Optical axis width

1.5 mm

Light source

Infrared LED (940 nm)

Power supply voltage

12 to 24 VDC 10%, ripple (p-p): 10% max.

Current consumption

120 mA max.

Output

Control output

Load power supply voltage: 30 VDC

Load current: 20 mA max. (residual voltage: 1 V max.);

Inflow current: 20 mA.;

Parallel output from all channels, NPN open collector;

Dark-ON operation.

Answer-back output

When remote teaching is ON, pin 28 will be used for this function.

Self-diagnostic output

Load power supply voltage: 30 VDC max.;

Load current: 20 mA max.

(Residual voltage: 1 V max.);

Inflow current: 20 mA;

NPN open collector.

Indicators

Power

Green indicator is ON when power is being supplied.

Warning

Red indicator is ON under the following conditions:

Teaching, no target object, insufficient light, or error.

Response time

10 ms max.

Control output interrupt input

All outputs interrupted: GND and control output interrupt input terminals are

short-circuited and 0-V short-circuit current is 1 mA max.;

Output interrupt reset: GND and control output interrupt input terminals are

opened or the voltage is between 9 V and the working power supply

voltage.

Remote teaching input

GND and remote input terminals are short-circuited and 0-V short-circuit

current is 1 mA max.

OFF

GND and remote input terminals are opened or the voltage is between

9 V and the working power supply voltage.

Teaching check function

Orange LED indicator

Ambient temperature

Operating

0C to 40C (32F to 104F) with no icing or condensation

Storage

- -25C to 60C (- -13F to 140F)

Relative humidity

35% to 85% with no condensation

Ambient illumination

Fluorescent lamp: 1,500 x max.

Noise resistance

Power supply line: 480 V in normal mode with noise simulator

Static electrical noise: No malfunction or destruction at 8 kV

Vibration resistance

10 to 55 Hz, 0.5 mm double amplitude for 2 hrs each in X, Y, and Z axes

Shock resistance

300 m/s

(30G) 3 times each in X, Y, and Z axes

Degree of protection

IEC60529 IP40

Connection

Pre-wired cable (length: 500 mm

35 mm)

IDC connector (insulation displacement)

Weight (packed state)

Approx. 110 g (3.8 oz)

Material

Optical axis

Polycarbonate

Case

ABS

Cable

Vinyl-insulated, bending type

Accessories

Spacer and instruction manual

Note: Operating conditions are restricted for the detection of transparent wafers. Contact your OMRON representatives for details.

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式